REGIONAL DETAIL · MUĞLA-MILAS · ~700 KM
The Muğla-Milas corridor is Turkey's most recognized white marble production region. Known internationally as Milas White, Muğla White and Muğla Lilac, this white-marble group combines high calcite content, low porosity and homogeneous bright tone — a strong technical and logistical alternative to Italian Carrara and Greek Thassos. Sipahi maintains multi-year sourcing relationships with regional producers; export orders route through Aliağa and Marmaris ports.
REGION
The province of Muğla — the Milas, Yatağan and Kavaklıdere district corridor — is Turkey's densest white marble production region. As an extension of the Menderes Massif geology, these deposits host high-calcite fine-crystalline white marble bodies. Historically the region has been an Anatolian marble craftsmanship center — ancient quarry traces are still identifiable. In the modern era Milas white marble is Turkey's highest-volume white-marble export category.
International trade names for the region include Milas White, Muğla White and Muğla Lilac. Milas White is the main bright-white category — pure, low vein, homogeneous tone. Muğla Lilac comes from the same geological corridor with a subtle lilac/mauve tint, preferred for residential bedrooms, spa and boutique-hotel interiors for warm luxury. The high calcite content (~98%+) delivers a technical profile comparable to Italian Bianco Carrara; water absorption ranges 0.10-0.25%, below many Mediterranean white marbles.
Sipahi Marble has sourced from the Muğla-Milas corridor since 1989. Road distance to our Adapazarı Tekeler coordination center is ~700 km — export orders preferentially route through Aliağa (İzmir) or Marmaris ports on FCL sea containers. Blocks, slabs and cut-to-size formats are all coordinated under Sipahi; the technical file bundles the CE Declaration of Performance and LEED submittal package.
TECHNICAL SPECS
Values below reflect the typical test range of regional production — verified per order via producer certificates. For export orders these values are attached to the CE Declaration of Performance and LEED submittal.
| Color | Bright white — cool white to off-white range; Muğla Lilac variant carries a soft lilac tone |
|---|---|
| Veining | Vein-free homogeneous batches common; fine grey-vein and crystalline batches selectable |
| Density (ASTM C97 typical) | 2.70-2.75 g/cm³ |
| Compressive strength (ASTM C170 typical) | ≥65 MPa (high calcite content) |
| Flexural strength (ASTM C880 typical) | ≥11 MPa |
| Water absorption (TS EN 13755 typical) | 0.10-0.25% (low porosity) |
| Abrasion resistance (TS EN 14157) | ≤20 mm (suitable for heavy pedestrian flooring) |
| Surface finish options | Polished, honed, brushed, sandblasted, antique |
Reference standards: TS EN 1469 (facade), TS EN 12058 (flooring), TS EN 12057 (modular), TS EN 1341 (external paving), TS EN 13755 (water absorption), TS EN 14157 (abrasion), ASTM C170 (compressive), ASTM C880 (flexural), ASTM C97 (density).
TYPICAL APPLICATIONS
Milas white marble is the Aegean's most recognized facade choice under TS EN 1469. The bright white tone reflects sunlight and creates a luminous facade identity — deployed in 5-star hotels, residences and boutique residentials as an alternative to Italian Bianco Carrara. High calcite content secures long-term panel life and color stability. Mechanical anchor + back-resin fixing is the standard installation method.
As an interior floor slab under TS EN 12058, Milas white marble is the first-tier choice for lobbies, halls, hammam and spa applications. Low water absorption improves indoor moisture resistance; polished delivers classic luxury aesthetics, honed delivers modern minimalism. Wall cladding is produced at 20-30 mm thickness with mechanical anchor or adhesive systems.
Milas white marble delivers high workability for monuments, memorial pedestals and ceremonial installations. Block supply (up to 2.4 x 1.2 x 1.2 m) is offered to sculptors and monument producers. Antique and hand-carved requirements are coordinated with our partner master craftsmen.
Low porosity and natural high whiteness make Milas suitable for pool surrounds, hammam benches and spa interiors. Honed or brushed slip-resistant finishes are preferred for water-contact surfaces. TS EN 12057 modular cut standards apply for pool-perimeter stone modules.
SIPAHI SUPPLY MODEL
Sipahi Marble runs a four-step business model for Muğla-Milas white marble orders:
LOGISTICS
Distance between the Muğla-Milas corridor and Aegean export ports underpins the material's competitive access to US, EU and Gulf markets. Milas → Aliağa (İzmir) port is ~250 km, Milas → Marmaris port is ~150 km — both routes reach the port in 3-4 hours by road, an FCL container can be delivered same-day.
Sipahi coordinates container planning with the regional producer under three models: (1) Direct-to-port shipment — single-color high-volume orders load directly at Aliağa/Marmaris from the producer, the fastest and most economical route; (2) Adapazarı transfer — mixed color-batch orders are consolidated at Adapazarı Tekeler with a final QC step, then routed via Ambarlı or İzmit; (3) Combined packaging shipment — mixed cut-to-size + slab orders are packaged on the partner-workshop + Adapazarı line before port delivery.
With rising US demand after Coverings 2027, Sipahi has expanded Aliağa-origin Milas white container planning; the İMİB Registry 336480 status supports export incentive schemes. For the EU market, CE Declaration of Performance is auto-prepared — a direct compliance package is issued for UK, German, Italian, French and Spanish buyers.
FREQUENTLY ASKED
Milas white shares aesthetic language with Italian Carrara but geologically shows higher calcite content and lower water absorption. Compared to Greek Thassos it is slightly warmer in tone with a broader vein-selection range. On pricing it sits below Carrara and is comparable with Thassos; export logistics from İzmir Aliağa port make Milas an advantaged option. The Muğla Lilac variant carries a soft lilac tone — a preferred sub-group for luxury residential projects.
Sipahi maintains multi-year sourcing relationships with producers across the Muğla-Milas, Yatağan and Kavaklıdere corridor. Once an order is confirmed, project specs (volume, color homogeneity, vein class, delivery schedule) are shared with the regional producer; block/slab reservation is opened and, on request, a block photo report is submitted for customer approval. Road distance from the region to our Adapazarı Tekeler center is ~700 km — FCL sea shipment is the preferred route for export.
For domestic orders even small residential line items (kitchen countertops, bathroom panels) are handled. For export orders one full container (~20-24 tons or 300-400 m²) is the economic floor. For prestige and high-volume hotel/residence orders we run 5+ container production plans. Samples and trade panels move on LTL.
All three are available. (1) Block supply: preferred by importer-fabricators and monument-sculpture producers, up to 2.4 x 1.2 x 1.2 m. (2) Slab supply: 2400 x 1200 mm and 3200 x 1600 mm standard formats for fabricators wanting ready material. (3) Cut-to-size: cutting, surface treatment and packaging to project dimensions coordinated at partner workshops; Sipahi remains the single point of contact. Export orders travel with CE Declaration of Performance and Certificate of Origin.
Muğla White is the main white category — pure bright white, low vein, homogeneous tone. Muğla Lilac is a variant from the same geological corridor with a subtle lilac/mauve tint — preferred for residential bedrooms, spa and boutique-hotel interiors seeking warm luxury. Milas White is a broader trade name covering both Muğla White and adjacent white groups. Tone definition and sample matching are critical prior to order — regional tone differences are documented in the LEED submittal file.
Road distance from Adapazarı Tekeler to Milas is ~700 km; typical domestic lead time is 5-8 business days — depending on producer stock and order size. For export, material moves out from Aliağa (İzmir) or Marmaris port on an FCL container within 3-4 weeks; interim transfer to Sipahi coordination center is optional. Cut-to-size fabrication adds 10-20 business days. Small domestic countertop orders use LTL trucking.
Share project dimensions, color (Milas White / Muğla Lilac) preference and surface finish via WhatsApp or email. First response same day, detailed written quotation within 24-48 hours. Adapazarı Tekeler showroom visits by appointment — Milas samples ready for review.
Sipahi Mermer ve Granit San. ve Tic. Ltd. Şti. · İMİB Registry 336480 · Adapazarı, Sakarya, Türkiye
RELATED PAGES
HUB
Regional Supplier Network
8 direct-supply regions, bulk-purchase leverage
REGIONAL DETAIL
Aydın White Marble
Mid-upper Aegean white, economical-luxury balance
REGIONAL DETAIL
İzmir Bergama Marble
Veined white character, İzmir port proximity
REGIONAL DETAIL
Antalya Travertine
Silver Travertine, Antalya Beige; Toros corridor
REGIONAL DETAIL
Denizli Travertine
5 variants — Classic, Silver, Ivory, Golden, Walnut
EVENT
Coverings 2027 Orlando
April 6-9, 2027 · US supply network briefing