REGIONAL DETAIL · AMASYA · NORTHERN BLACK SEA INLAND
Amasya is a historic beige marble production center in the northern inland section of Turkey's Black Sea region. Regional natural stones historically used in Ottoman architectural tradition remain preferred today in city-center restoration and modern residential projects for regional continuity. The warm-tone character matches Northern Black Sea inland climate and architectural references. Sipahi Marble runs direct producer relationships in the region.
REGION
Amasya province sits in the northern inland section of Turkey's Black Sea region, in the Yeşilırmak valley. Regional geology hosts calcite-based beige marble beds in the transition of the Anatolian inland plates. Warm beige tone and medium veining character make the region one of the natural stone production centers of the Northern Black Sea inland.
The Amasya city center hosts an Ottoman-era historic urban fabric (a UNESCO candidate); Yeşilırmak riverside Ottoman houses, Sultan Beyazıt Mosque, Rock Tombs of Kings and Saraçhane Mosque incorporate regional natural stones. This historical continuity makes Amasya-area beige marble particularly preferred in restoration projects; it is also used with regional reference in modern residential, hotel and public buildings.
Sipahi Marble sources from the Amasya region through direct producer relationships. Road distance to our Adapazarı Tekeler supply coordination center is ~500 km — a short-logistics advantage for Black Sea regional projects. Access to differently-characterized producers within the region makes vein-free, low-vein or mid-vein selection possible per project need.
TECHNICAL SPECS
The values below reflect the typical test range of regional production — verified per order via producer certificates. For export orders these values are attached to the CE Declaration of Performance and LEED submittal.
| Color | Warm beige — light to mid cream tones, Northern Black Sea inland character |
|---|---|
| Veining | Medium veining; vein-free and homogeneous classes selectable |
| Density (ASTM C97 typical) | 2.65-2.70 g/cm³ |
| Compressive strength (ASTM C170 typical) | ≥60 MPa |
| Flexural strength (ASTM C880 typical) | ≥10 MPa |
| Water absorption (TS EN 13755 typical) | 0.20-0.40% |
| Abrasion resistance (TS EN 14157) | ≤22 mm (suitable for high-traffic flooring) |
| Surface finish options | Polished, honed, brushed, antiqued, filet cut edge |
Reference standards: TS EN 1469 (facade), TS EN 12058 (flooring), TS EN 12057 (modular), TS EN 1341 (external paving), TS EN 13755 (water absorption), TS EN 14157 (abrasion), ASTM C170 (compressive), ASTM C880 (flexural), ASTM C97 (density).
TYPICAL APPLICATIONS
Amasya beige marble suits facade applications under TS EN 1469 as an Ottoman architectural heritage reference. Using Amasya-area natural stone in city-center historic restoration projects is important for regional continuity. In modern residential and hotel facades the warm beige tone also creates a rich character; panels are fixed with stainless steel mechanical anchors.
Under TS EN 12058, Amasya beige marble is preferred for classic-to-modern transition interiors with its warm-tone character. Polished finish suits prestige residential and hotel entry applications; honed finish is preferred for living areas and gallery spaces. Filet cut edge profiles are produced at partner workshops for staircase applications.
Amasya-area natural stones were historically used in Ottoman architectural tradition — today regional production centers continue to supply new mosque, tomb and historic building restoration projects. In courtyard paving, mihrab surround and column cladding, Amasya beige marble offers a regional-continuity reference. Short-logistics advantage for Northern Black Sea inland projects.
Beige tone matches natural wood, white and cream cabinetry — frequently preferred in residential kitchen countertops. In bathroom vanity, shower banquette and modular tile (TS EN 12057) applications, Amasya beige marble raises prestige. Filet cut edge profiles (bullnose, ogee) are produced at partner workshops.
SIPAHI SUPPLY MODEL
Sipahi Marble runs a four-step business model for Amasya beige marble orders. Sipahi is not a quarry operator and does not run its own CNC workshop; Sipahi serves as supplier, coordinator and fabrication partner — a single-point contact for the customer.
QUALITY STANDARDS
Amasya beige marble is tested under TS EN standards and shipped with CE Declaration of Performance. Facade references TS EN 1469; flooring references TS EN 12058; modular tile references TS EN 12057.
In restoration projects, physical-property match with the historic reference marble is critical within the framework of the General Directorate of Foundations and preservation board requirements; Sipahi shares producer test reports with the project's architect / preservation specialist team. Regional marble use is particularly important in restoration projects within the framework of Amasya historic-fabric UNESCO candidacy.
For international projects, ASTM C170, C880, C97 and C1028 values are provided together with producer test reports. For LEED-certified projects, producer location and material record are added to the submittal for Regional Materials credit.
FREQUENTLY ASKED
Amasya beige marble carries the Northern Black Sea inland geological character with warm tone and medium veining. It sits in the same broad beige marble family as Isparta beige (Sultan Beige) and Bilecik-Söğüt beige, but differs in tonal depth and vein character. It is preferred for regional continuity in Amasya city-center historic restoration projects that reference Ottoman architecture.
Sipahi works through direct producer relationships in the Amasya region. Once an order is confirmed, block/slab reservation is opened with the regional producer — on request, a photo report is prepared for vein-class and dimensional selection. Road distance to our Adapazarı Tekeler supply center is ~500 km; standard delivery lead time is 4-7 business days. Short-logistics advantage for Black Sea inland projects.
No minimum for domestic orders — small residential, restoration and boutique project line items are served. For export orders one full container (~20-24 tons or 300-400 m²) is the economic floor. LTL solutions are arranged for Black Sea regional projects as well.
All three are available. Block supply up to 2.4 x 1.2 x 1.2 m typical; slab supply in 2400 x 1200 mm and 3200 x 1600 mm standard formats; cut-to-size cutting, surface treatment and packaging to project dimensions coordinated at partner workshops. Sipahi is the single coordinator.
Amasya city center hosts an Ottoman-era historic urban fabric. In restoration projects, physical-property match with the historic reference marble is critical within the framework of the General Directorate of Foundations and preservation board requirements; Sipahi shares producer test reports with the project's architect / preservation specialist team. On request, a vein-character match report is prepared against the historic fabric reference documentation.
Amasya beige marble pricing depends on three main factors: (1) vein class (vein-free / low-vein / mid-vein — vein-free is the higher tier), (2) surface finish (polished, honed, brushed, antiqued — combined finishes rise), (3) order volume (bulk-purchase advantage scales with size). For standard pricing tiers, share project details via WhatsApp or email; a written quote follows within 24-48 hours.
Yes. Amasya beige marble ships under CE Declaration of Performance for TS EN 1469 (facade), TS EN 12058 (flooring) and TS EN 12057 (modular tiles). For LEED submittals, producer documentation is attached for Regional Materials contribution; technical values are included in the product spec sheet.
Share project dimensions, vein preference and finish via WhatsApp or email. Historical reference documentation can also be included for restoration projects. First response same day, detailed written quotation within 24-48 hours.
Sipahi Mermer ve Granit San. ve Tic. Ltd. Şti. · İMİB Registry 336480 · Adapazarı, Sakarya, Türkiye
RELATED PAGES
HUB
Regional Supplier Network
Direct-supply regions, bulk-purchase leverage
REGIONAL DETAIL
Bilecik Söğüt Beige Marble
Söğüt Beige, ~110 km from Adapazarı
REGIONAL DETAIL
Konya Beige Marble
Central Anatolia beige, Seljuk-Ottoman
REGIONAL DETAIL
Isparta Beige (Sultan Beige)
Lakes region beige, international brand
HUB
Cut-to-Size Turkish Fabrication
±0.5 mm tolerance, edge profiles, packaging
B2B
Sipahi Trade Program
Architects, GCs, distributors — supply support