REGIONAL DETAIL · KONYA · CENTRAL ANATOLIA
Konya is a historic beige marble production center in Turkey's Central Anatolia region. Marble beds historically used in Seljuk and Ottoman architecture still supply large-scale public, religious and prestige residential projects today. The warm-tone character matches Central Anatolia climate reference. Sipahi Marble runs direct producer relationships in the region.
REGION
Konya province sits in the western-southern part of Central Anatolia. Regional geology hosts calcite-based beige marble beds in the karstic and metamorphic transitions of the Anatolian plateau. Konya beige marble was historically used in Seljuk and Ottoman architecture; today the region's production centers continue to supply restoration and new-build projects.
The Konya region has historically used beige marble in mosque courtyards, sultan tombs and madrasah buildings — today marble from the same region is preferred as a historical-continuity reference in restoration documentation and new mosque projects. Regional producers' craftsmanship and complex-carving experience also add advantage in decorative, sculpture and filet-cut applications.
Sipahi Marble sources from the Konya region through direct producer relationships. Road distance to our Adapazarı Tekeler supply coordination center is approximately 630 kilometers. Access to differently-characterized marble producers within the region makes vein-free, low-vein or mid-vein selection possible per project need.
TECHNICAL SPECS
The values below reflect the typical test range of regional production — verified per order via producer certificates. For export orders these values are attached to the CE Declaration of Performance and LEED submittal.
| Color | Warm beige — light cream to mid cream (Konya Beige trade name) |
|---|---|
| Veining | Medium veining, homogeneous; vein-free (bianco) class selectable |
| Density (ASTM C97 typical) | 2.65-2.72 g/cm³ |
| Compressive strength (ASTM C170 typical) | ≥60 MPa |
| Flexural strength (ASTM C880 typical) | ≥10 MPa |
| Water absorption (TS EN 13755 typical) | 0.20-0.40% |
| Abrasion resistance (TS EN 14157) | ≤22 mm (suitable for high-traffic flooring) |
| Surface finish options | Polished, honed, brushed, antiqued, filet cut edge |
Reference standards: TS EN 1469 (facade), TS EN 12058 (flooring), TS EN 12057 (modular), TS EN 1341 (external paving), TS EN 13755 (water absorption), TS EN 14157 (abrasion), ASTM C170 (compressive), ASTM C880 (flexural), ASTM C97 (density).
TYPICAL APPLICATIONS
Konya beige marble suits facade strip-slab applications under TS EN 1469. The warm beige tone offers long-life durability in Central Anatolia climate conditions; panels are fixed with stainless steel mechanical anchors. Preferred in large-scale public and religious building projects that reference Seljuk-Ottoman architectural tradition.
Under TS EN 12058, Konya beige marble delivers soft-tone advantage and low porosity as an interior floor slab. Polished finish suits hotel lobbies, banking halls and prestige residential entries; honed finish is preferred for living areas. The warm tone creates heat-resistant aesthetics in Central Anatolia climate spaces.
Historically used in Seljuk and Ottoman architecture, Konya beige marble remains a preferred choice today for restoration and new mosque projects. As courtyard paving, mihrab surround, column base and minaret base cladding, it unites traditional aesthetics with modern application standards. Filet cut edge profiles (bullnose, ogee) are produced at partner workshops.
Beige tone pairs well with natural wood, white and cream cabinetry — frequently preferred in residential kitchen countertops. In bathroom vanity, shower banquette and modular tile (TS EN 12057) applications, Konya beige marble raises prestige. Konya's craftsmanship tradition means regional producers are experienced with complex-cut work.
SIPAHI SUPPLY MODEL
Sipahi Marble runs a four-step business model for Konya beige marble orders. Sipahi is not a quarry operator and does not run its own CNC workshop; Sipahi serves as supplier, coordinator and fabrication partner — providing a single-point contact for the customer.
QUALITY STANDARDS
Konya beige marble is tested under TS EN standards and shipped with CE Declaration of Performance. Facade references TS EN 1469; flooring references TS EN 12058; modular tile references TS EN 12057.
In restoration projects, physical-property match with the historic reference marble is critical within the framework of foundation authority and preservation-board requirements; Sipahi shares producer test reports with the project's architect / preservation specialist team. ASTM C170, C880, C97 and C1028 values are provided with producer test reports for international projects.
For LEED-certified projects, producer location and material record are added to the submittal for Regional Materials credit. For prestige projects Sipahi arranges a physical inspection appointment at Adapazarı Tekeler for vein class, color match and dimensional tolerance review.
FREQUENTLY ASKED
No. Konya beige marble is a standard beige marble with the Central Anatolian warm-tone character. Cappadocia Green is a separate greenish-onyx character natural stone from Central Anatolia, coordinated by some regional producers. Different geological formations, but both can be coordinated within the same Central Anatolia supply network — Sipahi routes the order to the correct regional producer based on project needs.
Konya beige marble offers warm tone and medium veining with the Central Anatolia geological character. It sits in the same broad beige marble family as Isparta beige (Sultan Beige) and Bilecik-Söğüt beige but differs in tonal depth and vein character. It is preferred for its historical continuity in large-scale public and religious building projects referencing Seljuk-Ottoman architecture.
Sipahi works through direct producer relationships in the Konya region. Once an order is confirmed, block/slab reservation is opened with the regional producer — on request, a photo report is prepared for vein-class and dimensional selection. Road distance to our Adapazarı Tekeler supply center is ~630 km; standard delivery lead time is 5-8 business days.
No minimum for domestic orders — small kitchen countertops, bathroom panels and mosque restoration line items are served. For export orders one full container (~20-24 tons or 300-400 m²) is the economic floor. For samples and trade panels we arrange LTL solutions.
All three are available. Block supply up to 2.4 x 1.2 x 1.2 m typical; slab supply in 2400 x 1200 mm and 3200 x 1600 mm standard formats; cut-to-size cutting, surface treatment and packaging to project dimensions coordinated at partner workshops. Konya region's craftsmanship tradition provides added experience for complex-cut and carving work.
Konya beige marble pricing depends on three main factors: (1) vein class (vein-free / low-vein / mid-vein — vein-free is the higher tier), (2) surface finish (polished, honed, brushed, antiqued — combined finishes rise), (3) order volume (bulk-purchase advantage scales with size). For standard pricing tiers, share project details via WhatsApp or email; a written quote follows within 24-48 hours.
Yes. Konya beige marble ships under CE Declaration of Performance for TS EN 1469 (facade), TS EN 12058 (flooring) and TS EN 12057 (modular tiles). For LEED submittals, producer documentation is attached for Regional Materials contribution; technical values are included in the product spec sheet.
Share project dimensions, vein preference and finish via WhatsApp or email. Historical reference documentation can also be included for restoration projects. First response same day, detailed written quotation within 24-48 hours.
Sipahi Mermer ve Granit San. ve Tic. Ltd. Şti. · İMİB Registry 336480 · Adapazarı, Sakarya, Türkiye
RELATED PAGES
HUB
Regional Supplier Network
Direct-supply regions, bulk-purchase leverage
REGIONAL DETAIL
Isparta Beige (Sultan Beige)
Lakes region beige, international brand
REGIONAL DETAIL
Kayseri Travertine
Central Anatolia travertine hub
REGIONAL DETAIL
Bilecik Söğüt Beige Marble
Söğüt Beige, ~110 km from Adapazarı
HUB
Cut-to-Size Turkish Fabrication
±0.5 mm tolerance, edge profiles, packaging
B2B
Sipahi Trade Program
Architects, GCs, distributors — supply support